Briggs & Stratton 1732 - Manual (Page 33)

31
Specifications
ENGINE:
1450 Series Briggs & Stratton
Make Briggs & Stratton
Model Snow Series Max, M20H
Gross Torque* 14.50 ft-lbs (19.7 Nm) @ 3060 rpm
Displacement 18.6 cu. in. (305 cc)
Oil Capacity 28 oz. (,84 l)
1550 Series Briggs & Stratton
Make Briggs & Stratton
Model Snow Series Max, M21H
Gross Torque* 15.50 ft-lbs (21.0 Nm) @ 3060 rpm
Displacement 20.87 cu. in. (342 cc)
Oil Capacity 28 oz. (,84 l)
1650 Series Briggs & Stratton
Make Briggs & Stratton
Model Snow Series Max, M21H
Gross Torque* 16.50 ft-lbs (22.4 Nm) @ 3060 rpm
Displacement 20.87 cu. in. (342 cc)
Oil Capacity 28 oz. (,84 l)
CHASSIS:
Wheels
- 1524, 1628 Tire Size: 16 x 4.8
Inflation Pressure: 20 psi (1,37 bar)
- 1732, 1738 Tire Size: 16 x 6.5
Inflation Pressure: 14 psi (,96 bar)
Spout Rotation 210 Degrees
Impeller 12 in. (30 cm) 4 Blade Ribbon Flighted Steel
Auger Opening Height 19 in. (47.5 cm)
Drive System
Friction Disc, 5 Forward Speeds, 2 Reverse
DIMENSIONS:
Effective Clearing Width
-1524
24 in. (60 cm)
-1628 28 in. (70 cm)
-1732 32 in. (80 cm)
-1738 38 in. (97 cm)
Length
-1524
57 in. (142 cm)
-1628 57 in.(142 cm)
-1732 57 in. (142 cm)
-1738 57 in. (142 cm)
Height
-1524
38 in. (93 cm)
-1628 38 in. (93 cm)
-1732 38 in. (93 cm)
-1738 38 in. (93 cm)
Weight
-1524
245 lbs (111 kg)
-1628 265 lbs (120 kg)
-1732 275 lbs (125 kg)
-1738 300 lbs (136 kg)
NOTE: Specifications are correct at time of printing and are subject to change without notice.
* The gross power rating for individual gas engine models is labeled in accordance with SAE (Society of Automotive
Engineers) code J1940 (Small Engine Power & Torque Rating Procedure), and rating performance has been
obtained and corrected in accordance with SAE J1995 (Revision 2002-05). Torque values are derived at 3060 RPM;
horsepower values are derived at 3600 RPM. Actual gross engine power will be lower and is affected by, among
other things, ambient operating conditions and engine-to-engine variability. Given both the wide array of products on
which engines are placed and the variety of environmental issues applicable to operating the equipment, the gas
engine will not develop the rated gross power when used in a given piece of power equipment (actual "on-site" or net
power). This difference is due to a variety of factors including, but not limited to, accessories (air cleaner, exhaust,
charging, cooling, carburetor, fuel pump, etc.), application limitations, ambient operating conditions (temperature,
humidity, altitude), and engine-to-engine variability. Due to manufacturing and capacity limitations, Briggs & Stratton
may substitute an engine of higher rated power for this Series engine.