Buffalo Technology 54MBPS BRIDGE BASE STATION WLA-G54 - Manual (Page 3)

3
ạ Wireless Configuration
Windows XP
If there is no Ethernet adapter available on the computer being used to configure the
AirStation, a wireless configuration may be performed using a correctly installed
802.11b or 802.11g wireless adapter.
To configure the AirStation via a wireless connection, establish a connection to
the AirStation using the setup instructions that came with the wireless client
card or adapter that you are using.
Buffalo highly recommends using Windows XP Wireless Zero Configuration
Service to connect to and configure Buffalo Access Points/Base Stations.
Windows 98SE/2000/ME
If there is no Ethernet adapter available on the computer being used to configure
the
AirStation, a wireless configuration may be performed using a correctly
installed 802.11b or 802.11g wireless adapter.
To configure the AirStation via a wireless connection, establish a connection
to the AirStation Compact Bridge using the setup instructions that came with
the wireless client card or adapter that you are using.