Buffalo Technology 54MBPS BRIDGE BASE STATION WLA-G54 - Manual (Page 6)

6
This completes the basic AirStation Configuration.To change advanced settings
consult the Buffalo Support Web Site:
http://www.buffalotech.com/wireless/support.
Connect the AirStation to your existing LAN
Once configuration is complete, connect the AirStation to your existing Local Area
Network. Plug the provided 7ft. Ethernet cable into any one of the four 10/100M
Ethernet ports on the AirStation 54Mbps Bridge Base Station and plug the
other end into an Ethernet hub or switch on your Local Area Network.
The LAN or Wired MAC address is the
default ESS-ID (SSID) of the AirStation.The
LAN MAC address is located on the rear
of the AirStation clearly labeled next to
the 4-port switch.
The Wireless MAC address of the
AirStation is used for WDS functionality.
MAC Address and SSID
Once the AirStation is connected to the existing LAN, users accessing the
LAN through the AirStation must configure the computer’s TCP/IP Settings to
match your existing LAN.
Contact your network administrator if your computer requires a static IP
Address or if using DHCP Services.