Class1 Valve - 119138 - Manual (Page 18)

18 Class 1 Valve Manual
p/n: 119138
5.4.2 Utilizing the KZCO EH5 Series Electric Actuator (for 2.5” & 3.0” Class1 Valves)
The diagram below shows the typical layout using the SPS Electric Valve controller (117010) with KZCO
EH5 series electrical actuator (p/n 117234). The harness part number is 117008-XX (where XX is the
length in feet – 05, 10, 15, 20, 25, 30).
Harness p/n 117008-XX (where XX is the length in feet – 05, 10, 15, 20, 25, 30).
KZCO EH5 series electrical actuator positioning details
Opening:
positive polarity on pin 3 (white wire).
Valve moves in counter-clockwise direction (as viewed from top).
Fully open, voltage feedback = 2.80V (± 0.25V).
Closing: positive polarity on pin 2 (green wire).
Valve moves in clockwise direction (as viewed from top).
Fully closed, voltage feedback = 1.00V (± 0.25V).
5. installation