Bissell 30C7 - Manual (Page 8)

using the tools
attach desired tool to hose for above floor
cleaning surfaces or hard to reach areas.
1. Remove Hose: With vacuum in upright posi-
tion, remove hose end from the suction inlet
near the bottom of the vacuum by the wheel.
Do not remove “tabbed” end of hose con-
nected to the clear tank.
2. Attach tools by firmly pushing onto vacuum
hose or extension wand.
2a. Dusting brush: Use brush side to dust
furniture, blinds, lamps, shelves, and
baseboards. 30C7 model only.
2b. Crevice Tool: Use in tight narrow spaces
2c. Extension Wand: Use with desired
attachment for longer reach.
2d. TurboBrush ® Tool: Use rotation brush
action for small flat areas such as
stairs,and furniture. Press gently down
and pull towards you in raking motion,
too much pressure will cause brush to
stop rotating.
note: Model 30c7t comes with
the pet turbobrush ® tool and fol-
lows same operation instructions.
2e. Pet Contour Tool ® (Included with 30C7T
only): Use to reach into corners and
edges on stairs as well as armrests and
other curved surfaces. The tool can be
flipped to use in any direction.
2
a.
b.
c.
d.
e.
w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1
O
perations
8
caution:
To avoid personal injury
and to prevent the cleaner
from falling when clean-
ing stairs, always place it
at the bottom of the stairs.