Operation (cont’d), Collet sizes, 2 remove the old collet – Steele Products SP-PT253 User Manual
Page 14: 3 insert the loose collet, 4 tighten the collet nut as described above, Balancing, 1 stop the tool, 2 loosen the collet nut, 3 rotate the accessory 1/4 turn, 4 tighten the collet
Advertising
Operation (cont’d), Collet sizes, 2 remove the old collet | 3 insert the loose collet, 4 tighten the collet nut as described above, Balancing, 1 stop the tool, 2 loosen the collet nut, 3 rotate the accessory 1/4 turn, 4 tighten the collet | Steele Products SP-PT253 User Manual | Page 14 / 31
Advertising