Steele Products SP-PT253 - Manual (Page 8)

Rotary Tool
8
Additional Warnings (cont’d)
Cutting Tool (cont’d)
Ensure that power tools are disconnected from the power supply when
not in use, before servicing, lubricating or making adjustments and when
changing accessories.
Always keep the accessory securing mechanism clean and free from
dust build-up.
Do not start the tool with the accessory in contact with the work piece.
Check the work piece for any protruding nails, screw heads or anything
that could damage the accessory.
Ensure that there are no obstructions underneath the work piece; it is
easy to cut into sawhorses and bench tops.
Always hold the tool by its insulated gripping surfaces when doing an
operation where the accessory could contact hidden wiring or the tool’s
power cord. Contact with a live electrical circuit will make the tool’s
exposed metal parts live, possibly causing electrical shock. Always
disconnect fuses or circuit breakers whenever working in any area
where you could come in contact with electrical wiring.
Always hold the hand piece firmly in your hands during the start-up. The
reaction torque of the motor, as it accelerates to full speed, can cause
the shaft to twist.
Do not alter or misuse tool. Any alteration or modification is a misuse
and may result in serious personal injury.
Always disconnect the power cord before attaching or changing
accessories. The tool could start unexpectedly, causing serious
personal injury.
Be aware of the switch location when picking up or setting down the tool
to avoid accidental starting and possible injury.
Never leave running tools unattended. Always stop and unplug the tool
before leaving it.
Clean the tool’s air vents regularly to prevent overheating.
WARNING! NEVER USE THIS PRODUCT AS A DENTAL DRILL OR IN
ANY HUMAN OR VETERINARY MEDICAL APPLICATIONS. SERIOUS
PERSONAL INJURY OR DEATH COULD RESULT.