Steele Products SP-GG750E - Manual (Page 14)

Owner’s Manual
13
Assembly
Handle Installation
Start by installing the handle on the
frame with two 8mm bolts.
Then install the handle retainer as
shown.
This generator has an option of not using the mobility
kit. If this is desired, just install the 4 rubber mounts
on the frame as shown. (this is why there are 6
mounts). If you want to use the mobility kit, save the
4 mounts in a safe place, and continue to the
“mobility kit installation.” section.
Here is a picture of the floor
mounts installed.
Floor Mount Instalation