Steele Products SP-PM207DC - Manual (Page 13)

TO START & STOP THE MOWER:
Carefully follow the illustration below, in order, when starting or stopping the mower. (see Fig.8 & Fig.9)
STARTING / STOPPING THE MOWER
See Fig 8 & Fig 9.
1. For the proper operation of this lawn mower , you need to inert the disable key in position, then the
lawn mower can be operated by move the level release first to make the switch control level available,
then hold the switch control level for operation .
2. For the stop of the lawn mower , just release the switch control level .
3. If your lawn mower not used for a while , pull out the disable key, then the machine can not operated
even actuated by holding the switch control level.
CAUTION: Do not attempt to override the operation of the safety key or lever.
WARNING: The operation of any mower can result in foreign objects being thrown into the eyes,
which can cause severe eye damage. Always wear safety glasses while operating the mower and while
performing any adjustments or repairs.
WARNING: Ensure that other people and pets remain at least 50 ft.(15m) away when the mower
is in use.
INSPECT THE CUTTING AREA
Remove all stones, sticks, wire, bones, and other debris that might be thrown by the rotating blades.
NOTE:
This mower is equipped with an internal circuit protector, If the mower stops, wait 10 seconds before
restarting.
OPERATION YOUR MOWER
13
LEVER RELEASE
SWITCH
CONTROL
LEVER
SWITCH
CONTROL
LEVER
Fig8
Disable key