Heater Craft 700S Series Wash Down - Manual (Page 5)

Wash Down Plate Installation
4
1. Determine the location for the wash down plate. Consider the routing of the water hoses and wiring.
2. Secure the wash down plate in place.
The wash down plate should be accessible for easy connection of the spray hose. A flat surface
area of 3.75" x 2.75" is needed for proper installation.
3. Cut a rectangular opening 2.60" x 1.75". Mark the mounting holes and pre drill using 7/64" drill bit.
Questions?
Call For Technical Support
(208) 687-4400 or
Fax (208) 687-9700
www.heatercraft.com