Fast & Fluid AT750 - Manual (Page 10)

p10
© Fast & Fluid Management, EuroAT
Operation
A - First time operation
Step 1 - Switching ON the dispenser & computer
>
The machine is automatically switched on when the power
connector at the back of the dispenser is plugged into a 220V or
100V-110V wall socket.
* We recommend to keep the machine on at all times.
Step 2 - Setting the stirring time
>
The stirring time and interval can be altered from its default
settings*. This can be done through the dispenser software,
check your software manual for instructions.
Please ask your paint supplier for optimal agitation settings for
your specific colorant products.
* Default value is 180 seconds of agitation every 3 hours.