Fast & Fluid AT750 - Manual (Page 8)

p8
© Fast & Fluid Management, EuroAT
Installation
A - Installing the dispenser
Step 1 - Unpack the machine
> >
Place the crate near the place
of installation. Remove the sides of the
crate.
Turn one off the sides up side
down so you can ride the
machine down from the
crate.
Remove the plastic foil
around the machine.
Be careful not to damage the body and surfaces of your EuroAT with any
tools while unpacking it.
> >
Remove pac king clamps and
bolds.
Carefully lift the machine
from the skid with a fork lifter
and roll the machine to its
final operational position.
Lower the adjustable feet far
enough to lift the machine off
its wheels.