BNC 1420 - Video Microscope - Manual (Page 8)

6
4. When "Found New Hardware Wizard" pops up check "Install the
software automatically (Recommended)" (this may vary with
Windows version). You can also force Windows to look on the
CDROM for the drivers.
5. A screen should pop up that says
"The software you are installing for this hardware
Hauppauge Win/TV 878/9 VFW Window Driver
has not passed Windows Logo testing..."
Click "Continue Anyway"
6. When you get the success report, click "Finish"
7. Next, the same thing may/should happen for the audio driver. You
do not need to install the audio driver for the scopePRO
application.
8. Now run setup.exe from the WinTV CD. If it tells you that you
need to install DirectX9.0, do so. DirectX9.0 can be downloaded
from the Microsoft web site. Install WinTV following the
instructions on the screen.
1.4.2 Installing the ADS USB2.0 capture peripheral
1. Insert the CDROM supplied with the ADS peripheral and follow
the on-screen instructions.
1.4.3 Installing the scopePRO Software
1. To install scopePRO, run setup.exe and follow the on-screen
directions. This setup program will link links to scopePROon your
desktop and Start menu and copy two files if they are missing from
your Windows/System32 folder: MFC42.dll and MSVCRT.dll.
Note: if your computer does not already have DirectX9.0 or greater
installed you will need to install it before running scopePRO.
DirectX9.0 is available on the installation CD supplied by BNC or
directly from Microsoft s website. Most computers will already
have this software installed.