PureFlow AirDog DF-165 - GM 1992-2000 - Manual (Page 9)

9
AirDogII
®
1992-2000 Chevy Diesel
Section 4 AirDog ® II & Mounting Brackets
Installing the AirDog
®
II & Mounting Brackets on the
Truck’s Frame!
Figure 2 Figure 3
4-1. Assemble the AirDog II mounting bracket to the frame bracket.
Figure 4 Figure 5 Figure 6
4-2. Use the spacer block to clear lines and wiring harnesses on the frame. Adjust the
assembly up or down on the frame bracket as necessary for clearance.
Out to ENGINE FUEL IN
4-3.
Install a 1/2” Male SAE J2004
Quick Connect x 3/8” NPTF
(08J2044-3/8NPTF) into the
“ENGINE” and “FUEL IN”
ports in the AirDog II.
Figure 7
4-4.
Install the 3/8” Male SAE J2004 Quick Connect x 1/8” NPTF fitting (06J2044-1/8NPTF)
into the “TANK” port of the AirDogII.
Figure 7a
WARNING: The NPT fitting threads must be lubricated with oil or
anti-seize compound before installation to prevent galling!
4-5.
Attach the AirDog II to the frame bracket assembly.
Figure 7b