Hyline Offroad JK TUBE STEP ROCKER PANELS (4 DOOR MODELS) - Manual (Page 4)

Q:\Hyline Offroad, LLC\Installation Instructions\400.300.100-JK TUBE STEP ROCKER 4 DOOR\400.300.100 Installation Instructions.doc Page 4 of 4
REV 1 04/16/13
14. Drill the hole in the bottom frame rail through the template using the 3/16” bit. Then use the 25/64” bit to drill the
final size hole. It’s important to use this exact size 25/64” bit for the tapped hole. Tap the hole using 7/16”-20 hand
tap.
15. After this hole is tapped clean out the threads and prep for installation of Rock Slider.
16. Repeat and follow steps 4-10 for installation on the Driver Side.
17. Install Black Plastic Tube Caps in each end of Rock Slider tube.
18. You’re installation is now complete.
Send your Photos to
[email protected] . If we choose any one of your pictures to be used on our
website, We’ll send you a FREE Hyline Offroad T-Shirt