Hornady RAPid Safe - Manual (Page 8)

Cable
Cable
Locked Lever
Unlocked Lever
RAPiD ™ Sleeve
RAPiD ™ Safe
without Sleeve
8
Security Cable
The RAPiD ™ safe includes a security cable, that
can be looped around a stationary object. With the
safe cover open, place the lug end of the cable
into the security cable slot and close the lid.
Removing & Reinstalling
the RAPiD
™ Sleeve
The RAPiD ™ sleeve accommodates most
5-inch pistols, and 4-inch barreled
revolvers. Removing the RAPiD
™ sleeve can
accommodate larger handguns or other
valuables.
To remove the sleeve, lift the levers located
on each side of the sleeve, and pull it out.
Reinstalling the sleeve is just as simple.
Make sure the levers are up and push the
sleeve in place, aligning the notches with
the bar. Press the levers down to lock the
sleeve in place. Remove and reinstall the
sleeve a few times to become familiar
with the process.