Belkin @TVplus G1V1000 8820-01176 - Manual (Page 3)

2
c. Advanced network connections
@TV will use UPnP to configure our network connection. In some
cases you will need to use your router’s setup pages to change a
few settings.
i. Apple using 3G/4G
1. In order to access @TV on a 3G or 4G network using an
Apple product like an iPhone, you may need to modify
your Port Forwarding settings. These settings allow your
@TV app and your @TV box to connect through your
router by opening specific ports (you can think of these
as doorways linking your @TV and your @TV apps). The
following section explains how to make those changes.
ii. Manual Port Forwarding settings
1. Open your router settings page and find the “Port
Forwarding” or “Virtual Servers” section (Belkin routers
call this “Virtual Servers”; most brands use the term
“Port Forwarding”).
2. Make the following setting changes on this page:
a. First open port 56123 for both UDP and TCP traffic
b. Then, open port 49177 to TCP traffic
3. Save the settings. Once these settings are saved in your
router, you should have access to @TV on iOS devices
over a 3G or 4G connection.
iii. More complex networks (NAT/firewall issues)
1. In some cases your @TV may be behind more than one
router: apartment complexes with shared Internet services
or homes with Wi-Fi extenders or Wi-Fi bridges would
fall into this category. In these situations, you will need
to also configure the second router or firewall device
with the same Port Forwarding settings as above.
SETUP AND INSTALLATION