Belkin @TVplus G1V1000 8820-01176 - Manual (Page 7)

6
3. IR-Learning
In this section you can help your @TV “learn” remote
commands. This is particularly useful if you have a cable or
satellite box not currently supported by @TV. The steps are
as follows:
a. Select the appropriate device you are trying to control
from the “Command Mapping” list.
b. From the list below, select the command that you are
trying to capture and then click “Learn.”
c. Follow the onscreen instructions and repeat until you
capture all of the remote commands you will need to
control your cable or satellite box.
d. When you are done, click “Save.”
CONNECTING TO YOUR CABLE OR SATELLITE SET-TOP BOX