Bowens QUAD2400 - Manual (Page 2)

Due to our policy of constant product improvement, Bowens International reserves the right to change equipment
specifications without notice.
Specifications
www.bowens.co.uk www.bowens.co.uk
Table of Contents
11 2
Description Page
Introduction and Safety Notes 3
Control Panel Guide 4 – 5
Flash and Modelling Function Overview 6 – 7
Triggering System 7
Getting Started 8
Warnings and Troubleshooting 9
Specifications 11
2
2 (1 per channel)
Manual Selection - Channel A = Symmetric
2 f-stops in one-stop increments
3 f-stops in 1 /
3
-stop increments on each channel
One LED numeric display per channel
±1% at maximum power
230V AC, 50/60Hz / 90 - 130V AC, 50/60Hz
Green Ready Indicator lights up at 100% charge.
Audio Ready Signal and Modelling Intermittent when selected.
15A thermal breakers for charge and modelling
6V
Switchable: On/Off
Switchable: On/Off
650w (max.) x 2
Off, Proportional, 100% or Automatic 100%
in either Continuous or Intermittent flash-indication mode.
QUADX Flash Head (BW7660)
281 x 184 x 336mm (362mm inc. handle)
2400w/s Channel A only or split 1200W-s Channel A + 1200W-s Channel B
37 to 2400w/s (6-stops)
Fast: <3 seconds (230V) <4 seconds (117V)
Slow: <5 seconds (230V) <6 seconds (117V)
640 (feet/100 ISO) with UV-coated tube
1/300 sec. at 2400W-s
1/1400 sec. at 600W-s
5600 K with UV-coated tube
9.5kg