AEM 30-3439 AEMnet Adapter for Wideband Failsafe 30-4900 - Manual (Page 3)

30-3439 AEMnet HARNESS INSTALLATION INSTRUCTIONS
ENGINEER: JT DATE LAST MODIFIED: 7/9/2013 Page 3 of 4
4. Insert the AEMnet+ terminal (white wire) into the available Pin 13 on the
Wideband Failsafe connector. Push the wire in until the locking mechanism on
the terminal and connector lock into place. Pull lightly on the white wire to
confirm the locking mechanism has latched. Figure 4 below shows the correct
placement of the AEMnet+ terminal.
Figure 4
5. Insert the AEMnet- terminal (green wire) into the available Pin 12 on the
Wideband Failsafe connector. Push the wire in until the locking mechanism on
the terminal and connector lock into place. Pull lightly on the green wire to
confirm the locking mechanism has latched. Figure 5 below shows the correct
placement of the AEMnet- terminal.
Figure 5