AEM 30-5130 Analog Wideband UEGO Gauge Gasoline AFR - Manual (Page 7)

Figure 5. F/IC Aux Gauge Setup
Connect the WHITE Analog Output + wire to the Aux Gauge input and the BROWN
Analog Output – wire to the sensor ground. Table 4 below lists the Lambda and Sensor
ground pin locations for the different FIC part numbers.
AEM F/IC P/N Lambda Pin Sensor GND Pin
30-1910(X) Pin 18 of 22-pin connector Pin 5 of 22-pin connector
30-1930(X)
Pin 18 of 22-pin connector
Pin 20 of 20-pin connector
Pin 5 of 22-pin connector
Table 4. F/IC Pin Locations
Connector Pinouts
The pinouts for the 6-pin sensor harness and 8 pin power harness are provided
below in Figure 6.
Figure 6. Harness Pinouts
Page 7