AEM 30-5141 Analog H2O Flow Gauge - Manual

AEM Performance Electronics
2205 126 th Street Unit A, Hawthorne, CA. 90250
Phone: (310) 484-2322 Fax: (310) 484-0152
http://www.aempower.com
Instruction Part Number: 10-5141 Rev 01
© 2009 AEM Performance Electronics
Part Number 30-5141
500 cc/min Water/Methanol Injection Flow Gauge
Figure 1. Wiring Schematic
AEM Water/Methanol Injection Flow Gauge Parts
1 x 35-5141(B/W) Flow Gauge Assembly
1 x 35-2126 Flow Sensor with Fittings
1 x 35-4302 Install Kit (6 Butt Connectors)
1 x 10-5141 Installation Instructions
1 x 35-3411 8-Pin Power Harness
1 x 35-3415 3-Pin Sensor Harness
1 x 35-8529S Silver Bezel
1 x 35-8441 Rubber Band
This product is legal in California for racing vehicles only and should never be used on public highways.