AEM 30-5144 Analog Boost Fuel Pressure SAE Gauge User Manual
Page 6
Page 6
3-pin sensor harness
Red - 5V sensor power
Black - Sensor ground
Green - Sensor signal
8-pin power harness
Red
– 12V Power
Black
– Power ground
Pink
– Switched 12V power
White
– Analog output
Brown
– Analog ground
Grey
– Lighting intensity
Specifications
Gauge
Supply Current
0.1 A
Differential Analog Outputs
1
Measuring Range
0 PSI
– 15 PSI
0 Bar to 1 Bar
Operating Voltage (nominal)
8.5-15 volts dc
Harness & Connector Temp Limit: 105C
Notes
The sensor is a precision pressure measuring device and should not be subject to
mechanical or thermal shock or it may be damaged.
If further tuning help is needed be sure to visit the video gallery or performance
electronics forum at www.aemelectronics.com for comprehensive instructional videos
and information.
Recommended Parts
30-8444 Dust Boot
Replacement Components
35-3411
8-Pin Power Harness
35-3412
3-Pin Sensor Harness
35-2131-15 Pressure Sensor
Table 2. Wire functions