AEM Infinity v96 Infinity EMS Version 2.96 Upgrade Notes User Manual
Page 8
Infinity User Manual
8
© 2014 AEM Performance Electronics
A firmware update will erase the USB log channel list stored in the ECU
memory. This channel list will need to be reset before USB logging will function
correctly. See Log Menu for more info.
Troubleshooting:
If the process hangs at any point, wait at least one minute for it to continue.
Some PCs take longer to reconnect to to the ECU during this process. Some
PCs may have other processes running that affect the response time of the
USB ports. If the process has not continued as described above after one
minute, do not cycle key power. Instead, remove the USB cable from the PC,
wait a few seconds then plug it back in. Often this will force the OS to reset the
port allowing the process to continue.