Electra Townie Balloon Fender Set (350106, 350107) - Manual (Page 2)

Townie Balloon Fender Set Installation Instructions
DIFFICULTY LEVEL: Moderate
NOTE: Installation requires removal and reinstallation of wheels and disconnection of brakes. If you are
not comfortable doing these tasks, consult your Electra dealer for installation.
1) Tools Needed
Required:
• 3mm hex wrench
• 4mm hex wrench
• 8mm socket, open or adjustable wrench
• 10mm socket, open or adjustable wrench
2) Parts List
(2) Fenders, front and rear (not pictured)
(2) Fender stays
(2) M5 hex head machine screws w/washers, 9mm long
(5) M5 hex head machine screws w/washers, 10mm long
(1) M5 hex head machine screws w/washers, 12mm long
(1) M6 hex head machine screws w/washers, 45mm long
(2) M5 nylon thread lock nuts
(1) M6 nylon thread lock nut
(1) washer w/6.5mm center opening
(2) washers w/5mm center opening
ELECTRA BICYCLE COMPANY ® ,LLC. • 3275 CORPORATE VIEW, VISTA, CA 92081
TEL 760-607-2453 • ORDERLINE 800-261-1644 • FAX 760-598-7350 • WWW.ELECTRABIKE.COM