Electra Townie Balloon Fender Set (350106, 350107) User Manual
Page 3
STEP 1: Installation of front fender
Place bicycle in stand (if available) and remove front wheel
1) Select proper fender stay for application.
Shorter stay is for use with front fender.
2) Install front fender stay to fender, using M5x9mm
machine screw, washer w/5mm opening and M5
lock nut. Tighten using 3mm hex wrench and 8mm
or adjustable wrench.
3) Install fender on fork crown using M6x45mm machine
screw, washer w/6.5mm opening and M6 lock nut.
Tighten using 4mm hex wrench and 10mm or
adjustable wrench.
4) Attach fender stay ends to fork dropout eyelets,
using M5x10mm machine screws. Tighten using
4mm hex wrench.
Reattach front wheel.
Reconnect front brake, spin wheel and makes sure that
wheel is centered in dropouts and that brake pads are
not rubbing on rim and that fenders are not rubbing
on tire. Check brake operation.
ELECTRA BICYCLE COMPANY
®
,LLC. • 3275 CORPORATE VIEW, VISTA, CA 92081
TEL 760-607-2453 • ORDERLINE 800-261-1644 • FAX 760-598-7350 • WWW.ELECTRABIKE.COM
STEP 1:1
STEP 1:2
STEP 1:3
STEP 1:4