SCT iTSX (Ford 4015,GM 4416 ) - Manual (Page 11)

SCT PERFORMANCE, LLC.
User’s Manual
9. Select the desired setting for the User Option(s).
10. When you have finished adjusting the User Options, touch the “Approve these options”
button to continue.
11. The iTSX will show a summary screen of the User Options you adjusted and is now ready
to send the pre-loaded tune file and User Options to the vehicle. To proceed, touch the
“Send this to the Vehicle” button.
12. iTSX will prompt you to “Turn Key Off”. Turn the ignition key to the “Off” position.
13. Once the ignition key is “Off”, you will then be prompted to touch the “Turn Key On”.
Turn the ignition key to the “On” position, but do not start the vehicle.
14. Once the key is in the “On” position, the iTSX will begin the process of installing the pre-
loaded tune file into your vehicle. During this process, your factory tune file will be
backed up and stored in the iTSX accessory, and the iTSX will install the pre-loaded tune
file.
15. IMPORTANT: During the installation process, do not remove the iTSX accessory from the OBD-II port or walk
away from your vehicle with your mobile device. Doing so may cause the iTSX to lose the Bluetooth wireless
connection.
16. Once the installation process is complete, the iTSX will display the “Download Complete. Turn Key Off”
message box. To continue, touch the “End Programming” button.
17. It is now safe to remove the iTSX accessory if required and operate your vehicle.
3.3 Returning your Vehicle to Stock
Returning your vehicle to the factory tune file:
During the pre-loaded tune file installation, your factory tune file was backed up and stored in the iTSX accessory. If at
any time you need to return your vehicle to the factory tune file, follow the procedure below:
1. From the iTSX main screen, touch the "Program" menu item.
2. When the Start Programming panel appears, touch the “Return to Stock” button to begin
the process of returning your vehicle back to the factory tune file.
3. To return your vehicle to the factory tune file, touch the “Send this to Vehicle” button to
proceed.
4. iTSX will prompt you to “Turn Key Off”. Turn the ignition key to the “Off” position.
Once the ignition key is “Off”, you will then be prompted to touch the “Turn Key On”.
Turn the ignition key to the “On” position, but do not start the vehicle.
5. The iTSX will install your factory tune file back into your vehicle.
IMPORTANT: During the return to stock process, do not remove the iTSX accessory from the
OBD-II port or walk away from your vehicle with your mobile device. Doing so may cause the
iTSX to lose the Bluetooth wireless connection.
6. Once the installation process is complete, the iTSX will display the “Download Complete.
Turn Key Off” message box. To continue, touch the “End Programming” button.
7. It is now safe to remove the iTSX accessory if required and operate your vehicle.