SCT iTSX (Ford 4015,GM 4416 ) - Manual (Page 14)

SCT PERFORMANCE, LLC.
User’s Manual
Continued… Using the iTSX Gauges to Monitor & Data Log your vehicle’s engine parameters:
Setting a Minimum / Maximum Range for the gauge:
The Minimum / Maximum values allow you to customize the range of each gauge. The Minimum value is the starting
range that will be displayed on the gauge, and the Maximum value is the highest range that will be displayed.
To set a Minimum / Maximum value:
1. Touch the Minimum / Maximum text box.
2. The device keyboard will be shown, allowing you to enter the desired Minimum / Maximum
value for the gauge.
Setting up Warning / Alerts for the gauge:
Each gauge allows you to set a Low & High Warning / Alert to notify you when a desired value is
reached. When the set value is reached, the gauge will display a WARNING indicator (round gauges)
or the background of the gauge display will change to “RED” (rectangular digital gauges).
To set up the Low Warning / Alert value:
1. Touch the “Warning <=” text box.
2. The device keyboard will be shown, allowing you to enter the desired value for the Low
Warning / Alert.
3. Whenever the vehicle parameter assigned to this gauge is equal to or lower than the set value,
the gauge will display a Warning / Alert.
To set up the High Warning / Alert value:
1. Touch the “Warning >=” text box.
2. The device keyboard will be shown, allowing you to enter the desired value for the High
Warning / Alert.
3. Whenever the vehicle parameter assigned to this gauge is equal to or higher than the set
value, the gauge will display a Warning / Alert.
Monitoring the Gauges with your configured Parameters:
1. Once you have finished configuring the gauge, touch the “Save Gauge” button to return to Editing mode.
2. To begin Monitoring / Data Logging your vehicle’s configured parameters, touch the blue Save button.
3. The iTSX will scan the available parameters, and begin displaying the vehicle’s data on the gauges.
Connecting External Analog Inputs
Using the wiring specifications that came with your analog sensor, connect to the proper pins using the diagram below.
1. To configure an Analog Input, have your desired gauge
layout already displaying on your device, touch anywhere
on the screen to enter Editing mode and touch the “Edit”
button when displayed.
2. When in Editing mode, the gauges will appear with
dashed lines around each gauge.
3. To assign an Analog, touch the gauge you wish to assign the analog input to.
4. Tap on the field labeled “source”, a list of available analogs will appear to choose from.
5. Select the proper Analog Input based on the correct wire color used to hook up your analog sensor.
6. Tap on the field labeled “units”, in this list we have preloaded the most commonly used analog sensors. Choose
the appropriate sensor, if the sensor you are using is not part of this list you will be able to input a custom
equation at the bottom of this list. When done tap on the “save gauge” button.
7. To save the changes, now tap on the “Save” button on the top right of the screen.