Program vehicle menu – SCT X3 ECONOMIZER (Ford 3030) User Manual
Page 6
PROGRAM VEHICLE MENU
Programming Your Vehicle
This menu allows you to program the vehicle using one of the pre-loaded flash tuning
files. This menu option will also allow you to adjust the User Adjustable
Options on the tuning files.
Flashing Your Vehicle With Pre-Loaded Files
Note: Be sure NOT to remove or unplug the OBD-II cable or turn the ignition key to
the off position during this process. You will be prompted to program the vehicle with
the pre-loaded tuning file after the stock program has been successfully uploaded.
The upload and download status will appear on-screen during each process.
Plug the X3 Economizer into the vehicle’s
OBD-II port. Leave the ignition key in the OFF
position and select the Program Vehicle menu
option to begin. Once you select the main
menu option, the Program Vehicle sub-menu
will appear on the screen.
When the Program Vehicle sub-menu
appears, use the arrow up & down keys to
navigate to the menu option you want. The
Install Tune option will be the default menu
option. To program using the pre-loaded tune
file, press the select key and you will enter the
Install Tune sub-menu.
When the Install Tune sub-menu appears,
scroll to the type of tune you want to load.
The pre-loaded tune option is the default
menu option. Press the select key and you
will be prompted to turn the key ON, which
will start the tuning process.
You will be prompted to turn the ignition key on and off multiple times as part of the
tuning process. DO NOT unplug the OBD-II cable at any point during this process.
Program Vehicle
Install Tune
Return To Stock
X3 Economizer
Program Vehicle
Data Capture
Vehicle Info
Tune Type
Pre-Programmed