JB Conversions 16-1201 HD Super Short SYE Kit for the NP231J - Manual (Page 3)

3
4) Remove the bearing housing (Fig.2) from the rear case half to
expose the pump (Fig.3).
FIG: 2 FIG: 3
5) Remove the 10mm hex bolts holding the rear case half to the front
half and separate the two halves. The pump can be stay on top of the
rear case half as the rear case half is lifted off of the front half.
6) Remove the spring from the top of the mode fork (Fig.4).
FIG: 4