Brookstone Digital Photo Frame - Manual (Page 25)

24
5 . It may take a few seconds for Windows ® to recognize the photo frame . When the
photo frame is recognized, 3 new removable drives should appear in Windows ®
Explorer . One of these drives is labeled SCANFRAME, representing the internal
memory of the photo frame . The other 2 drives are labeled Removable Disk,
representing CF type I card and SD/MMC/MS/xD card in sequential order .
Images scanned onto the frame will appear in a folder called “Scanned Images”
in the SCANFRAME folder .
note: Frame drive letter assignment may vary from pc to pc.
6 . Copy all images you wish to transfer and paste them onto your computer in the
location of your choice . Images may also be copied and pasted onto one of the
removable disk drives if a memory device is inserted into the frame .
7 . When you have finished copying pictures, disconnect the computer by
double-clicking on the Safely Remove Hardware icon in the lower right screen
of your Windows
® screen .
8 . Highlight the USB Mass Storage Device drive and then click on the Stop button .
After notification, unplug the USB cable from the computer and the photo frame .