Apple PowerBook G3 - Manual (Page 97)

6 Click Install or Remove.
If you are installing software, the selected items will be installed on your
computer. If you are removing software, the selected items will be deleted
from your computer.
The Installer may also remove or delete associated files that are required for
the items you choose.
7 Repeat steps 4 through 6 for all the software you selected.
After you finish installing or removing a software product, the Installer for
the next product you selected opens automatically.
8 After you’ve installed all the software you selected, restart your computer.
Problems during installation
This section helps you solve problems you may encounter while installing
your software.
You can’t start up the computer using the system software CD-ROM disc.
Cause: Your computer located the system software on your hard disk before it
located the system software on the CD. If you have an external hard drive with
system software, the computer may have started up from that device instead of
the CD-ROM disc.
Solution: With the CD in the drive, open the Startup Disk control panel and
click the CD icon. Then restart the computer.
You’ll need to reselect your hard disk as the startup disk after you install the
software. Open the Startup Disk control panel again and click the icon for
your hard disk. Then restart your computer.
97 Diagnostic Techniques