Warning, Placing your child in the walker – Baby Trend Walker WK37 User Manual

Page 4

Advertising
background image

Fig. 8

Fig. 9

Fig. 10

Fig. 11

COMPLETED WALKER

clip-on

7. To attach the toy bar, clip the hooks on both sides of the toy bar to the

walker tray as shown in figure 8. Do not use the toy bar if it has been

damaged or broken.

8. To fold the walker, turn the button to unlock and push it to release as

shown in figure 9.

1. Always check the walker prior to each use to ensure that the seat is snapped

in place and that the walker has no loose or broken parts. Do Not use the

walker if it is damaged or broken or missing parts.

2. Before placing your child in the walker, please determine that your child is

developmentally ready for this type of product. Generally, your child must

be able to sit upright unassisted and have adequate neck strength to exhibit

very good control of his or her head. Typically, a child should be at least 6

months of age to use this product. Infants develop at different rates and you

should discuss the use of a walker with your pediatrician to ensure that your

infant is ready.

3. Adjust the seat height of the walker to the lowest setting. Place your child

in the walker and check that both feet touch the floor. The child should

have only part of their weight on their feet when their legs are straight.

Adjust the walker height as needed as your child grows. Do not adjust

height with child in the walker. Discontinue using the walker if your child

attempts to climb out, reaches 30 pounds in weight or 32 inches in height,

or when your child is able to walk unassisted.

4. The baby walker can be used for 3 different heights. To adjust height,

remove baby from walker. Turn the safety button lengthwise and press the

safety button until the mechanism is released. Adjust to desired height as

shown in figure 10.

WARNING:

TO REDUCE CHANCE OF

CHILD SLIPPING OUT OF THE SEAT, CHECK

THAT BOTH FEET OF THE CHILD TOUCH

THE FLOOR.

5. When the position has been selected, check that the safety button turned

through 90 degrees to prevent the accidental release of the mechanism as

shown in figure 11. Always follow this procedure. Never use the baby

walker if the button is not in the sideways position. Important: Never

change the height when the baby is in the walker.

PLACING YOUR CHILD IN THE WALKER

3

IF YOU EXPERIENCE ANY DIFFICULTY IN USING THIS PRODUCT PLEASE CONTACT OUR

CUSTOMER SERVICE DEPARTMENT AT (800) 328-7363 BETWEEN THE HOURS OF 8:00AM

AND 4:30PM PACIFIC STANDARD TIME OR VISIT OUR WEBSITE AT

WWW. BABYTREND.COM FOR ASSISTANCE.

Advertising
This manual is related to the following products: