Bissell VAC & SHINE 60P4 - Manual (Page 6)

O
perations
6
dry Vac
1. Attach the Gentle Clean ® MicroFiber pad
onto the base of the unit. Begin by attach-
ing the pad onto the Velcro on one side
of the unit, wrapping it under the foot and
attaching on the other side
Tip: if the microfiber covers the
vacuum suction path, the unit will
not suction. see picture 1B.
2. Turn the unit on.
3. With the Dry Vac side of the unit facing
forward, begin cleaning. You will see dry
dirt, crumbs and debris being collected in the
Dirty Tank.
4. Check the filter frequently. If you see hair
and fuzzy debris collecting on the filter,
remove the dirty tank and dirty tank lid to
clean the filter.
To clean the filter, gently tap it on the
edge of the trash can, brushing off
anything that may be sticking to the filter.
The filter can also be rinsed with warm
water. Let air dry before inserting back
into the unit.
1. To change from dry vacuuming to wet
cleaning simply flip the unit around!
Tip:
When the trigger is squeezed
the vacuum suction will stop;
extending battery life.
switching from dry Vac to Wet mop
Tip:
The MicroFiber pad should be
placed in the areas directed.
Covering the vacuum suction
path will stop all suction.
1.
2. 4.
1A.
1B.
Power
Button