Bissell Auto Care Proheat 1425 series - Manual (Page 10)

T
roubleshooting
10
w w w . b i s s e l l . c a 1 - 8 0 0 - 2 6 3 - 2 5 3 5
Water & formula are draining out from the clean tank
Possible Causes Remedies
1. Power cord not plugged in 1. Check electrical plug
2. Blown fuse/tripped breaker 2. Replace household fuse or
reset breaker
Reduced spray or no spray
Possible Causes Remedies
1. Spray Nozzle clogged 1. Clean Spray Nozzle
2. Clean/Solution Tank empty 2. Check/Refill Tank
3. Clean/Solution Tank insert clogged 3. Clean insert at bottom of
Clean/Solution Tank
Reset breaker
4. Pump needs priming 4. Gently lift Clean/Solution
Tank while depressing the
Spray Trigger OR Gently
squeeze clean tank while
depressing Spray Trigger
Deep Cleaner won’t pick up cleaning solution
Possible Causes Remedies
1. Poor Upholstery/Carpet Tool position 1. Reposition Upholstery/Carpet
Tool on surface, follow
recommended cleaning
procedures
2. Dirty/Collection Tank is full 2. Empty Dirty/Collection Tank
3. Upholstery/Carpet Tool Brush worn 3. Replace with new Brush
4. Excess solution in Vacuum Flex Hose 4. Lift Tool and point upwards
to allow water in Hose to
flow into the
Dirty/Collection Tank
5. Incorrect Cleaning Formula 5. Use BISSELL Auto Cleansing
Formula, BISSELL Little Green
Formula ou BISSELL Pet Odor &
Stain Formula
TurboBrush attachment-Brush will not turn
Possible Causes Remedies
1. Incorrect switch position on TurboBrush 1. Reposition switch to
Brush position
TurboBrush attachment– No Suction
Possible Causes Remedies
1. Incorrect switch position on TurboBrush 1. Reposition switch to
Brush position
Thank you for selecting a BISSELL product.
Please do not return this product to the store
for any question or concern, BISSELL is happy to be of service.
Contact us directly at, 1-800-263-2535