Bissell Auto Care Proheat 1425 series - Manual (Page 5)

5
w w w . b i s s e l l . c a 1 - 8 0 0 - 2 6 3 - 2 5 3 5
H
ow To Use This Guide
Please read this Guide thoroughly before
assembling your cleaner. Pay particular
attention to the product diagram, assembly
instructions, and part names.
1.
Begin by locating and organizing all parts
before assembly.
2.
Familiarize yourself with the parts and where they go.
following this User’s Guide will let you get the
best performance from your BISSELL Auto Care
Proheat® for many years.
The Clean/Solution Tank is the tank to your
left as you face the unit looking at the black
power switch.
The Dirty/Collection Tank is the tank to your right
as you face the unit looking at the black power
switch.
The Auto Care Proheat® models give you
the ability to raise the water temperature for
improved cleaning performance based on your
cleaning needs.
After turning the Built-In Heater Switch on, the
Heat Indicator Light will illuminate, indicating the
heater has reached the correct temperature.
The clip guides the storage of the vacuum flex
hose around the unit.
Attaches to the unit for storage of
the TurboBrush.
The standard tool that attaches to the Vacuum
flex Hose.
To remove the Power Cord, gently twist/rotate
the Quick Release Cord Wrap clockwise.
A
uto Care Proheat® Product Features
Clean/Solution Tank
Dirty/Collection Tank
Built-In Heater Switch (Red)
Heat Indicator Light
flex Hose Clip
TurboBrush Clip
Tough Stain Tool
Quick Release Cord Wrap