Apple QuickTime Conferencing ISDN Kit - Manual (Page 10)

Configuring the ISDN Setup control panel
Before you can start videoconferencing, you must configure the ISDN Setup
control panel. This section summarizes the setup procedure. For detailed
information, see the online Apple Media Conference Guide, available in the
Guide (h) menu when Apple Media Conference is active.
1 Open the ISDN Setup control panel.
Choose Control Panels from the Apple (K) menu; then choose ISDN Setup
from the submenu that appears.
Can’t find the control panel? If you don’t see the ISDN Setup control panel in
the Control Panels folder, you need to install the software. For instructions,
see the online document Installing Your Software, located on the QuickTime
Conferencing CD.
2 Open the “Connect via” pop-up menu and choose Built-In ISDN.
3 Click the triangle next to Settings to display the Phone Service pop-up menu. (Skip this
step if the pop-up menu is already showing.)
4 Open the Phone Service pop-up menu and choose the appropriate settings for your
country. There are two choices for the USA and Canada (NI1 or 5ESS).
If your ISDN service provider gave you one service number (SPID), choose
5ESS. If you have two service numbers (SPIDs), choose NI1.
10
2
4
6
3
5
7