Apple QuickTime Conferencing ISDN Kit - Manual (Page 16)

Understanding the H.320 activity information in the ISDN Setup
control paneI
The ISDN Setup control panel provides information about the activity on
your H.320 ISDN connection. (To see this information, open the ISDN Setup
control panel and click the triangle next to H320 Activity.)
You can use the activity information to confirm that you are sending audio,
video, and other data across the H.320 ISDN connection.
The audio field shows the rate at which audio data is transferred over the
ISDN connection and the type of audio compression that is used.
The video field shows the rate at which video data is transferred over the
ISDN connection and the type of video format that is used.
Note: For detailed steps on how to change the audio compression and the
video format, see the online Apple Media Conference Guide.
The data field shows the rate at which other data (such as the content on the
whiteboard) is transferred across the network. (LSD indicates that the data is
being sent over a low-speed data channel.)
Note: Data rate allocation is done automatically. For example, if you send a
large file to your videoconferencing partner, the H.320 software will
temporarily increase the data rate for data, and decrease the data rate
for video.
16
Click the triangle to
display H.320 activity.
Total data rate is the
the number of kilobits
used to send audio,
video and data.