Apple iPod touch iOS 3.1 - Manual (Page 34)

See“Using Voice Control with iPod” on page 46.
Stereo Headset
The headset included with Fall 2009 models with 32 GB or more (shown here) features
a microphone, volume buttons, and an integrated button that allows you to control
audio and video playback.
Center button
Plug in the headset to listen to music or record a voice memo using the built-in
microphone. Press the center button to control music playback, even when iPod touch
is locked. You can also use the equivalent button on your Bluetooth headset to control
these functions.
Pause a song or video Press the center button once. Press again to
resume playback.
Skip to the next song Press the center button twice quickly.
Adjust the volume Press the + or – button.
Use Voice Control Press and hold the center button. See “Voice
Control” on page 33.
Bluetooth Headphones
You can use iPod touch with Bluetooth stereo headphones for wireless listening
(not available on first-generation iPod touch).
Pairing Headphones with iPod touch
You must first pair your Bluetooth headphones with iPod touch before you can use
them.
Pair Bluetooth headphones with iPod touch:
1 Follow the instructions that came with the headphones to make them discoverable.
2 In Settings, choose General > Bluetooth and turn Bluetooth on.
3 Select the headphones and, if prompted, enter the passkey or PIN number. See the
instructions about the passkey or PIN that came with your headphones.
34 Chapter 2 Basics