Using voice control with ipod – Apple iPod touch iOS 3.1 User Manual

Page 46

Advertising
background image

The scrubber bar lets you skip to any point along the timeline. You can adjust the
scrub rate from high-speed to fine by sliding your finger down as you drag the
playhead along the scrubber bar.

Scrubber bar

Playhead

Playback
speed

30-second repeat

Email

Send an email link to this podcast

Tap

.

Skip to any point

Drag the playhead along the scrubber bar. Slide
your finger down to adjust the scrub rate. The
scrub rate becomes slower the farther down you
slide your finger.

Play back the last 30 seconds

Tap .

Set the playback speed

Tap

. Tap again to change the speed.

= Play at double speed.
= Play at half speed.
= Play at normal speed.

Using Voice Control with iPod

You can use Voice Control (available only on Fall 2009 models with 32 GB or more) to
control music playback on iPod touch.

Note: Requires included headset or compatible accessory with microphone.
Voice Control isn’t available in all languages.
Use Voice Control: Press and hold the Home button until the Voice Control screen
appears and you hear a beep. Then use the commands described below to play songs.

You can also press and hold the center button on the iPod touch headset (included
with Fall 2009 models with 32 GB or more) or the equivalent button on your Bluetooth
headset to bring up Voice Control.

Control music playback

Say “play” or “play music.” To pause, say “pause”
or “pause music.” You can also say “next song” or
“previous song.”

Play an album, artist, or playlist

Say “play,” then say “album,” “artist,” or “playlist”
and the name.

Shuffle the current playlist

Say “shuffle.”

46

Chapter 3

Music and Video

Advertising