Apple MacBook Pro (17-inch, Late 2008) User Manual
Page 11
Chapter 1
Ready, Set Up, Go
11
Note:
When you first connect the power adapter to your MacBook Pro, an indicator
light on the MagSafe connector starts to glow. An amber light indicates the battery
is charging. A green light indicates that the battery is fully charged or is not installed.
If you don’t see a light, make sure the connector is seated properly and the power
adapter is plugged into a power outlet.
Step 2:
To access the Internet or a network, connect one end of an Ethernet cable
to your MacBook Pro and the other end to a cable modem, DSL modem, or
network.
To use a dial-up connection, you need the external Apple USB Modem, available for
purchase from the online Apple Store at www.apple.com/store or from an Apple
Authorized Reseller. Plug the Apple USB Modem into a USB port on your MacBook Pro,
and then connect a phone cord (not included) from the modem into a phone wall jack.
Ethernet
cable
®
Gigabit Ethernet port
(10/100/1000Base-T)
G
®