Brother HL-2170W - Manual (Page 38)

Installing the Printer Driver
36
STEP 2
Macintosh
®
M
acint
osh
®
Wir
e
less
Network
Configuration in Infrastructure mode, using a network cable temporarily
Before configuring the wireless settings
Important
• If you have previously configured the wireless
settings of the printer, you must reset the print
server back to the default factory settings (see
page 46)
• You must know your wireless network settings
before you proceed with this installation.
• You need to temporarily use an Ethernet cable
during configuration.
Configure the wireless settings
1
Make sure the printer power switch is on.
2
Turn on your Macintosh
®
. Put the supplied CD-
ROM into your CD-ROM drive.
3
Double-click the HL2100 icon on your desktop.
Double-click the Start Here icon. Follow the
on-screen instructions.
4
Click Install Printer Driver on the menu
screen.
5
Click Wireless Network users.
6
Choose Wireless Setup and Driver Install
(Recommended), and then click Next.
7
Choose Step by Step install
(Recommended) and then click Next.