Apple iPod (with color display) - Manual (Page 41)

Using iPod 41
• To set slides to show on PAL or NTSC televisions, set TV Signal to PAL or NTSC.
Note: PAL and NTSC refer to television broadcast standards. Your television may use
either of these, depending on the region where it was purchased. If you aren’t sure
which your television uses, check the documentation that came with your television.
To view a slideshow on iPod:
n
Select any photo, album, or roll and press Play. Or select any full-screen photo and
press the Select button. To pause the music and the slideshow, press the Play/Pause
button.
If you selected a playlist in Photos > Slideshow Settings > Music, the playlist plays
automatically when you start the slideshow. The photos advance automatically
according to settings in the Slideshow Settings menu. To skip to the next or previous
photo manually, press the Next/Fast-forward or Previous/Rewind button.
To connect iPod to a television:
Your television must have RCA video and audio ports, or an S-video port.
1 Connect the optional iPod AV Cable to the Headphones port on iPod.
You can also connect the iPod AV Cable to the Line Out port on the iPod Dock and put
iPod in the Dock. You must use an iPod Dock for iPod with color display. Other iPod
Docks won’t work.
Note: Use the iPod AV Cable made specifically for iPod. Other similar RCA-type cables
won’t work. You can purchase the iPod AV Cable at www.apple.com/ipodstore.
LL0354_UG.book Page 41 Thursday, March 3, 2005 4:44 PM