If you can’t see photos on your television, If your ipod remote isn’t working – Apple iPod (with color display) User Manual

Page 65

Advertising
background image

Tips and Troubleshooting

65

If photos aren’t transferring, be sure your camera is turned on and set to the correct

mode for importing photos. See the instructions provided with your camera. Also be

sure the cable is connected firmly to your camera and to the camera connector.

If You Can’t See Photos on Your Television

If you transferred photos directly from a camera or card reader to iPod, you can’t see

them in a slideshow on a TV. You must transfer photos from your camera to your

computer, then transfer them to iPod using iTunes.

Be sure your television is set to display images from the correct input source (see the

documentation that came with your television for more information).

Be sure all cables are connected correctly (see page 41).

If you’re using the iPod AV Cable, be sure the yellow end is connected to the video

port on your television.

Note: Use RCA-type cables made specifically for iPod. Other similar cables

won’t work.

On iPod, go to Photos > Slideshow Settings and set TV Out to On, then try again.

If that doesn’t work, on iPod, go to Photos > Slideshow Settings and set TV Signal to

PAL or NTSC, depending on which type of television you have. Try both settings.

If Your iPod Remote Isn’t Working

Make sure the remote’s Hold switch is off.

Make sure the remote is plugged firmly in to iPod, and that the headphones are

plugged firmly in to the remote.

The iPod Remote can be purchased at www.apple.com/ipodstore.

LL0354_UG.book Page 65 Thursday, March 3, 2005 4:44 PM

Advertising