Blaupunkt TRAVELPILOT LUCCA 3.3 - Manual (Page 68)

68
•
3D auto zoom
– Select whether you desire auto
zoom or no auto zoom as de-
fault in 3-D view during a navi-
gation.
•
2D auto zoom
– Select whether you desire
low auto zoom, standard auto
zoom, high auto zoom or no
auto zoom during a navigation
with 2-D view.
Note:
For 2-D and 3-D auto zoom, the
zoom depth is changed in refer-
ence to your speed: If you travel
slowly, the scale becomes smaller.
If you travel faster, the scale be-
comes larger. The deeper the auto
zoom, the smaller the scale of the
map.
•
2D-view
– Select whether the map should
be oriented to the north or in
driving direction by default dur-
ing a navigation with 2-D view.
Time Zone
In the Time zone menu, you can set
the time zone that is valid for your
position. This setting is important for
the correct calculation of estimated
arrival times.
•
Time zone
Touch this fi eld to set the time
zone valid for your position.
•
Daylight saving time
Touch this fi eld to toggle between
daylight savings time (button with
check mark) and winter time (but-
ton without check mark).
Note:
If the time is changed at your loca-
tion or if you drive into a different
time zone, you must adjust the
corresponding settings.
Format
In the Format menu you can specify
which units of measure should be
used for times and distances and the
language to be used for the menus
and voice output of the Lucca.
➜
➜
Confi guring Lucca
Lucca3_3_long_GB.indd 68 Lucca3_3_long_GB.indd 68 18.10.2006 15:05:31 Uhr 18.10.2006 15:05:31 Uhr