Beko DRVT 61 W - Manual (Page 17)

17 EN
To start a new programme after the
programme is over or to interrupt the
programme, the childproof lock should be
deactivated. To deactivate the childproof
lock, press the same buttons for 3 sec.
C
One of the LEDs on the program
follow-up indicator starts flashing when
the child-proof lock is activated.
C
Child-proof lock is deactivated when
the machine is restarted by pressing
the On/Off button.
Ending the programme through
cancelling
The program which is selected first will
keep on going even if the position of the
programme selection button is changed.
A new programme can be selected and
started after “Programme cancel” is
activated in order to change the drying
programme.
To cancel any selected programme;
• Press “Start/Pause/Cancel” button
for about a duration of 3 seconds.
The “Filter cleaning” warning LEDs as
well as the “0” warning LED on the
programme follow-up indicator will
light up at the end of this period for
reminding purposes.
A As the inside of the machine will
be excessively hot when you cancel
the programme while the machine
is running, activate the freshen up
program to cool it down.
End of programme
The “Filter cleaning” warning LEDs as
well as the “0” warning LED on the
programme follow-up indicator will light
up at the end of the programme. The
door can be opened and the machine
becomes ready for a second cycle.
Press the “On/Off” button to shut down
the machine.
C
A 2-hour anti creasing programme to
prevent laundry from creasing will be
activated if you do not take the laundry
out after the programme has come to
an end.
C
Clean the filter after each drying
(please see, Filter cleaning).