Spyclops SPY-DVR16 User Manual - Manual (Page 7)

7
• Standard: “PAL” is default setting. “NTSC” is the standard for North America and will need to be selected
for a clearer picture. If you are outside of North America you will need to check to see what standard
your country uses
*Note: Any time you change the resolution, the system will have to be rebooted to make changes
3.2 Screen Set-up
• Channel: This will select each camera view so you can adjust each one accordingly
• Color Adjust: To adjust Hue, Brightness, Saturation, and Contrast of each channel as needed. You can
copy your configuration to either another channel or all channels.
• Camera Title: You can change each camera name as you select each different channel
• OSD Alpha: The menu transparency can be adjusted as needed
• VGA resolution: Choose the best VGA resolution for your monitor size, keep in mind if you are viewing on
a computer or laptop, will you have the screen maximized? The following chart can assist you in
determining which resolution is best for your monitor/screen
RESOLUTION SCREEN SIZE
800 x 600 780 x 430
1024 x 768 1000 x 600
1280 x 1024 1180 x 850
1920 x 1080p 50Hz/60Hz Most standard televisions
• TV Adjust: Not all screens will need this option. If you can’t see every corner of your menu screen; TV
Adjust will let you adjust the sides, bottom and top to fit the menu into your screen view
• Auto Switch: Select to switch camera views automatically. Can choose between every 2 seconds up to
every 10 seconds