Synergy 5013 - Jeep JK Rear Coilover Kit User Manual
Page 8
Advertising
11) With tabs positioned, cycle suspension from bump to droop to ensure no binding is
occurring. Now is also a good time to trim the 807204-05 lower skid plate to fit
depending on how shock tabs are positioned and how much has been cut off the
RLCA brkt.
12) Included with the 807204 RLCA Brackets are sway bar tabs, and bottom shock tab
skids to be used if needed. Again, proper cycling of rear suspension will need to be
done to correctly place sway bar tabs. Pictured below is a fully installed RLCA
bracket with all tabs on a 2dr JK with a rear stretch kit.
Advertising