Synergy 5016 - Jeep JK Unlimited Three Seat Bracket - Manual

SYNERGY MFG. 870 INDUSTRIAL WAY, SAN LUIS OBISPO, CA (805) 242-0397
5016 JEEP JK UNLIMITED THREE SEAT BRACKET
GENERAL NOTES:
• These instructions are also available on our website; www.synergymfg.com.
Check the website before you begin for any updated instructions and additional
photos for your reference.
• The installation of this bracket allows removal of the 60 side of the 60/40 split in
the rear seats of a 4dr JK while safely retaining the smaller portion of the rear
bench.
• This is a bolt on installation that can be done with simple hand tools. No cutting,
grinding or welding is required.
PARTS LIST:
1. (1) 501601 JK three seat bracket
2. (1) ½-20 UNF nylock nut
3. (1) ½” flat washer
4. (1) 3/8-24 UNF nylock nut
5. (1) 3/8” flat washer
INSTALLATION:
1) We will begin by removing the larger half of the rear bench seat.
2) There are 9 total attachment points that will need to be removed.
6 fasteners attach the bench to the floor
1 fastener attaching the 60/40 portion together
2 seat belt attachment points.
3) Begin by removing the bench attachments to the floor of the vehicle. Use an
18mm socket for all these attachment points. See images below for reference.