Synergy 5016 - Jeep JK Unlimited Three Seat Bracket User Manual
Page 7
Advertising
9)
Lift up on the bracket side of the seat to center up the holes in the bracket which
attach to the body. Torque to 45 ft-lbs.
10) Torque the 3/8” nut to 25 ft-lbs
11) Torque the ½” seat belt nut to 50 ft-lbs
12) Reinstall the remaining seat mounting bolts back into the vehicle to seal up the
holes in the floor. Keep all other hardware from the removed seat half in a safe
place for reinstallation later down the line.
Advertising